MDS_Matrx_logo_30.gif (4144 bytes)Flo-Safe Logo 2.gif (2953 bytes)

 


The convenience and reliability you need for safe, dependable delivery of nitrous oxide.

flosafebw.jpg (36406 bytes)Automatic Switchover - Automatically maintains consistent pressure and flow of gases to operatories. Its sophisticated electronic controls detect when a tank of oxygen or nitrous oxide is empty and automatically switches to a full tank while alerting you to replace the empty tank.

Remote Alarm Panel - (shown below) Easily mounted on wall or desktop (P/N 91307605 optional desk mounting kit, available on request) up to 100 feet from the manifold, for remote monitoring of the manifold's operation. Audio and visual alarms indicate high and low pressure.
alarm.gif (21073 bytes)

Manual Override - It takes only seconds to manually override the electronic controls in the event of a power failure or other emergency, allowing gases to flow until power is restored or the system is serviced.

Programmable Security -  The optional programmable security code, accessible at the Alarm Panel, makes it easy to restrict access to the manifold's operation.

Pressure Relief Valves - Self-resetting and easy to service on-site, these new relief valves vent gas in the event of high pressure.

Automatic Failsafe - The proven Matrx automatic failsafe prevents the flow of nitrous oxide if the oxygen flow stops for any reason.

Optional Zone Valve - Easy to install and operate, it allows remote gas shut-off for emergencies, an important safety feature required on multistory installations.

Simplified Diagnostics - Easy-to-understand LED and icon configurations.

Pre-Installation Kit - Helps assure trouble-free installation of the manifold and alarm panel for both new and existing construction.

NFPA Code 99C and Canadian Z350.1 - The new Flo-Safe manifold meets or exceeds the U.S. fire safety and prevention standards.

Flo-Safe Specifications
Manifold Dimensions (WxHxD) 12-7/8" x 11-1/2" x 2-1/2"
Alarm Dimensions (WxHxD) 6-7/8" x 4-7/8" x 1-3/8"
Shipping Weight 35 lbs.
Maximum Working Pressure 75 psi
System Working Pressure 50-55 psi
Hose Maximum Working Pressure 250 psi (1000 psi burst)
Hose Length 36"
Outlet Line Size N2O - 3/8" OD Copper
O2 - 1/2" OD Copper
Low Pressure Alarm Point 40 psi
High Pressure Alarm Point 65 psi
Primary Voltage to Manifold 115 VAC nominal +/- 10%; 60 Hz
Wire 100' - 4 conductor/20 gauge plenum rated
Fuse (re-order #63882532) 5 x 20mm, Type F, 0.500 Amp@250v


To locate your nearest authorized Matrx dealer

In The US or Canada Phone 800-847-1000 or 716-662-6650

Fax 716-662-8440 or email your request to: matrx@matrxmedical.com

In Europe call 41-27-4816-570

Fax 41-27-4818-391 or email your request to:
matrxuk@matrxmed.com
or celiazermattenmatrx@bluewin.ch

BSI_Registered_Firm_logo_50.gif (8983 bytes)


Dental Catalog Request | Home Page | More New Products | Dental Products

Send mail to webmaster@matrxmedical.com with questions or comments about this web site.
Copyright ©2004 Matrx All Rights Reserved
Revised: September 28, 2004